Cross contamination

Facing and Controlling Cross-Contamination in Food Processing

Cross-contamination can occur at virtually any stage in the flow of food processing, and prevention is crucial. Understanding where and how it can happen makes prevention easier, and the four most common routes of cross-contamination are outlined below:

1. One of the main means of cross-contamination is actually the individual who handles the food. For instance, food can become contaminated if a worker who was dealing with raw chicken earlier didn’t effectively wash his/her hands prior to handling ready-to-eat products or if they forgot to put on gloves or perhaps they are wearing a soiled uniform.

2. Another route of cross-contamination is unclean equipment where an uncontaminated meal can come into contact with an unhygienic utensil, part of a device or maybe an unclear work area. For instance; if the raw material receiving truck driver did not wash down their truck before carrying the materials, then there is a chance that the raw material is contaminated.

3. Cross-contamination can also occur due to direct transfer between various foods, say when a meal drips contaminated juices onto another meal. The most common example here is the storage of uncooked meat besides ready-to-eat food products.

4. Transfer of food allergens from an allergenic food to non-allergenic food is also one of the means of cross-contamination. Mislabeling and mishandling of food products are ultimate justifications for allergen cross-contamination. Imagine the worker who is transferring the food from the temporary storage room to the packaging area takes a detour to the processing area and unintentionally walks by the wheat production area. Food allergies are a significant problem for individuals who have to contend with them. Not only this, but the company might face lawsuits and gain a bad reputation due to their mishandlings of food products.

Now that we have established the most common means of cross-contamination, let’s look at the different ways by which you can successfully avoid them.

Personal Hygiene

A well-designed personal hygiene program is a must when it comes to avoiding cross-contamination. It is highly likely that food handlers will transmit foreign material from their skin, hand, or hair without a proper hygiene program in place. The following program will highlight different best practices in food handling such as handwashing, glove use, and hand care.

The aim is to reduce the possibility of food cross-contamination through employee awareness.

This prerequisite program should also include personal habits such as bathing, clean clothing (and the importance of a clean uniform), and the use of hair and beard nets at all the times.

The health of employees is another factor that influences the cross contamination. An unwell employee should be removed from any area where there is a moderate likelihood of food or related ingredients becoming infected. It is important to know if employees are healthy or if they have any disease or illness that could contaminate your food product. Therefore, regular inspection and medical screening prior to employment should be conducted and a record of illness and injury should also be maintained.

Workers’ hands must be washed thoroughly and every so often while handling the food. For instance, after handling raw meat, seafood or after using the restroom, they must remember to wash their hands, and after washing their hands it is vital to ensure that they are dried properly by using paper towels. Finally, they should sanitize their hands prior to returning to work.

Each year, millions of foodborne disease cases occur all over the world. Therefore, it is critical that all involved parties focus on ensuring safe food handling. Employee training is key as it will encourage them to follow everyday sanitation rules and thereby reduce the chance of people becoming ill due to cross-contamination. The training should include basic food safety practices such as personal cleanliness and good sanitation practices to prevent food product contamination. Posters demonstrating best practices can be displayed where possible as an additional support to the training.

Color Coding

The most straightforward way to put a stop to contamination and distinguish between workstations is color coding. It is a well-known fact that the tools used for raw meat should not touch the end product. This helps to control the risk of pathogens such as Listeria Monocytogenes, E. Coli, Salmonella and so on. Another advantage of changing tools for different processes is to control cross-contamination of common allergens.In both cases, if a food manufacturing facility uses color coding to distinguish between the tools and equipment it will help to mitigate cross-contamination. It will also support the facilities with maintaining Good Manufacturing Practices. Identification of appropriate areas for storage, cleaning, and sanitization is also much easier with color coding of tools and locations.

Occasionally food processing facilities use unique color coding. Food facilities can determine the colors which best suit the company’s objectives, processes, product types, and facility design. For example, a peanut processor may select white for direct contact while a processor of milk powder might choose a different color such as green or red.

The color coding system will only work if it is properly communicated to the employees. Clear guidance should be provided to the employees outlining the importance of the program and exactly how it should function. The procedure should also explain the steps to take in the event of a nonconformance.

Process Flow

A cross-contamination prevention plan should also consider how the process moves across the company. From the starting point ie the receipt of the raw material, to the finished product, the process should be evaluated to understand how ingredients come into the facility and how they will be processed. This will help to determine the crossing of product and probable points of cross-contamination. The solution to prevent cross-contamination could be to move products in sealed packages/containers and confirm that no leakage is present.

If it is not possible or allergens are of concern, then sanitization of the area is the key.

It is also a good practice to complete the production of non-allergenic foods first and then allergens at the end of the day. The production line should be sanitized following the last batch. Where this is not possible, sanitization processes need to be in place in between the change of production.

Cleaning

Cross-contamination will occur if the food product comes into contact with insufficiently cleaned surfaces such as equipment, clothes, and utensils. The efficiency of cleaning must be inspected on a regular basis and the cleaning policies should outline the systematic procedure, ie high-risk areas should be cleaned first. The most dangerous source of microorganisms is a floor and drain. Cleaning and sanitization of floors and drains should be repeated at the end of each production day along with precautionary measures for the duration of production to minimize the microbial growth and food safety risk. Cross-contamination between different plant areas can be managed by using the methodical sanitation program.

Ahead of using cleaning chemicals and sanitizers, it is of the utmost importance that employees read and understand labels and the material safety data sheet as well as understand how to use the appropriate personal protective equipment. They should also understand how to use signs, stick to the procedures, and be careful while moving on the wet floor.

Cleaning is not only limited to food contact surfaces; as mentioned previously in this article, clothes are a known source of cross-contamination. Bacteria or food particles can be transported from one place to another by means of dirty clothing and in order to stop this, clothes should be changed when moving from one production area to another. This is especially crucial while working with high-risk foods or allergens.

A plan to eliminate cross-contamination can be put together by combining all of these different pieces. However, it still does not mean that nothing will go wrong during daily production.

The strategy of cross-contamination prevention needs to be reviewed periodically, typically on at least an annual basis. The food facility will need to change its approach every time a substantial change occurs, ie if a new product is developed or supplier is changed. A thorough plan that is rigorously enforced will help identify and tackle any weaknesses in the process flow, containing and resolving issues within the facility and preventing cross-contaminated products from reaching consumers.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *